Ultrasonic Testing Equipment

 

The HS PA30-E represents a leading TFM phased array detector, boasting the capacity for complete focalization through a remarkable array of up to 64 elements. This configuration ensures its suitability for addressing intricate phased-array detection, while simultaneously processing detection data in real-time.

Its adaptability extends to accommodating two sets of TOFD inspection channels, enabling the seamless integration of dual-phased array TOFD imaging. Furthermore, this advanced system has the capability to perform comprehensive scans and inspections of welds encompassing thicknesses of up to 100mm in a single operation.

 

HSPA30-E includes the features as below:

Enable real-time TFM full-focus scanning imaging with the capability to harness a 64-element arrangement.

The focus law possesses the versatility to accommodate numerous PA scanning techniques, enabling simultaneous scanning and imaging operations.

With a dual TOFD channel feature, allowing for the integration of dual-phased array TOFD imaging (PAUT).

Using dual linear array (DLA) and double-sided array (DMA) technology to enhance the detection capabilities for austenitic stainless steel.

Facilitate the output of multi-channel video display signals to various screen displays, with accompanying control and feedback mechanisms.

Integrate a dual-axis encoder interface, empowering two-dimensional corrosion C-scan and wheel probe inspections.

Ultilizing high-speed network transmission capabilities to achieve real-time data uploads and downloads.

 

The HSPA30-E instrument finds application in the following domains:

Utilize TFM phased array technology for inspecting plates, pipes, and welds.

Incorporate a 2x32 dual-linear array, along with a double-sided array, to enhance the detection capabilities for austenitic stainless steel. Primarily designed for TFM phased array inspection of intricate structures or materials, including but not limited to PE pipe electric, composite materials, TKY butt welds, flanges, and blades.

 

 

Phased Array Parameter
Parameter classification	Parameter remarks	Phased array channel	Conventional channel
PA/UT configuration	Receive/transmit	32/64	4-channel TOFD (2 pairs, one transmit and one receive)
Pulser	Pulse voltage	50V-100V Continuously adjustable	100V-350V Continuously  adjustable
	Pulse excitation method	Negative square wave	Negative square wave
	Pulse width	30ns~500ns/2.5ns	30ns~500ns/2.5ns
	Pulse rise time	<8ns	<15ns
	Repetition frequency	200Hz -10KHz	200Hz -1KHz
	Delay accuracy	0-20us/2.5ns	0-655us/10ns
	Transmit impedance	/	500/25Ω
Receiver	Gain range	0~80dB	0~110dB
	System  bandwidth	0.5-20MHz	0.5-15MHz
	Receive delay	50us/2.5ns	/
Data acquisition	Sampling Rate	100MHz	100MHz
	Maximum A-scan length	8192	2048
	Focus mode	Regular/dynamic/full range	/
	Focus type	Depth/sound path/horizontal	/
Scan and display	Detection wave	Positive detection, negative detection, full detection, radio frequency	Positive detection, negative detection, full detection, radio frequency
	Scan type	S Scan/L Scan/Composite Scan	/
	Display mode	A/B/C/L/S/3D	A/B/C
Programmable TCG	Number of points	32	/
	Maximum gain	40 dB, Gain step is 0.1 dB	/
	Maximum gain slope	40 dB/us	/
Data storage	SSD	256G	Â
Monitor	Screen size	10.1"	Â
	Resolution	1280x800	Â
	Touch screen type	Capacitive touch screen	Â
I/O interface	USB	USB3.0/ USB2.0	Â
	Ethernet	1000Mb/s	Â
	Video output mode	HDMI	Â
	Encoder	ODU-7PIN Dual encoder	Â
Language	Â	Chinese / English	Â
Power supply	DC supply voltage	DC15V	Â
	Battery	11.1V-17AH	Â
	Continuous working time	No less than 4 hours	Â
Total Weight	The whole machine without a battery is 3.6kg, battery 900g	Â	Â
Overall size	340mmx230mmx100mm	Â	Â

 

http://www.ndtzkcx.com/